J AND P PETROLEUM PRODUCTS INC -- ASPHALT CUTBACK CEMENT  -- 5610-00-236-4946
<pre>=====================  Product Identification  =====================

Product ID:ASPHALT CUTBACK CEMENT
MSDS Date:01/01/1987
FSC:5610
NIIN:00-236-4946
=== Responsible Party ===
Company Name:J AND P PETROLEUM PRODUCTS INC
Address:2715 S WESTMORELAND STATION A
Box:4206
City:DALLAS
State:TX
ZIP:75208
Country:US
Emergency Phone Num:331-5401
CAGE:60140
=== Contractor Identification ===
Company Name:J AND P PETROLEUM PRODUCTS INC
Address:2715 S WESTMORELAND STATION A
Box:4206
City:DALLAS
State:TX
ZIP:75208
Country:US
CAGE:60140

=============  Composition/Information on Ingredients  =============

Ingred Name:NO INGREDIENT FOR THIS FORMULATION_INGREDIENT

=====================  Hazards Identification  =====================

Effects of Overexposure:DIZZINESS AND PALE APPEARANCE

=======================  First Aid Measures  =======================

First Aid:AIR OR OXYGEN INHALATION TO CLEAR LUNGS OF PETROLEUM
    HYDROCARBON VAPORS.

=====================  Fire Fighting Measures  =====================

Flash Point:40.6/105 PMCC
Lower Limits:0.7
Upper Limits:6.0
Extinguishing Media:CO*2,DRY CHEM.
Fire Fighting Procedures:FOAM,CO*2,DRY CHEM.

==================  Accidental Release Measures  ==================

Spill Release Procedures:NORMAL CLEAN UP;REMOVE POSSIBLE SOURCES OF
    IGNITION.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORAGE TEMP.RANGE 50 TO 120 F IN
    CLOSED CONTAINER.
Other Precautions:KEEP AWAY FROM CHILDREN.KEEP CONTAINER CLOSED WHEN
    NOT IN USE.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NORMAL CHARCOAL GAS MASK IS RECOMMENDED.
Ventilation:NORMAL MECHANICAL VENTILATION IS ADEQUATE
Supplemental Safety and Health

==================  Physical/Chemical Properties  ==================

HCC:F2
Boiling Pt:B.P. Text:149/300PMCC
Vapor Pres:0.3
Vapor Density:4.76
Spec Gravity:0.784
Evaporation Rate &amp; Reference:0.16,N-BUTYL ACETE
Solubility in Water:<.0
Appearance and Odor:BLACK ASPHALT WITH ASPHALTIC ODOR.
Percent Volatiles by Volume:32

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:CLOSED AREA LACKING ADEQUATE VENTILATION
Hazardous Decomposition Products:CO AND CO*2

====================  Disposal Considerations  ====================

Waste Disposal Methods:SAME AS OTHER LOW VOLATILITY,NON-TOXIC PETROLEUM
    SOLVENTS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.